Okuma VAC-I D8-A Drives-AC Spindle is supported for repair and exchange services. Precision Zone has proven expertise and unique capabilities to perform the highest quality repair services of the supported products.
At Precision Zone, we dynamically test repaired units in our custom-built test stands where the product is paired with the matching components for real-world load performance verification. We are on standby to address your requests and questions.
| PRODUCT INFORMATION | |
|---|---|
| OEM: | Okuma |
| Product Line: | Drives-AC Spindle |
| Series: | VAC-I D8-A |
VAC-I D8-A
is an
Drives-AC Spindle
manufactured by
Okuma
Discovered issues:
Bad Capacitor(s), Bad Control Section/Board, Bad Magnetic Contactor, Relay, Leaky Capacitors (Open, Corroded Traces)
Repaired on:
10/5/2022
VAC-I D8-A
is an
Drives-AC Spindle
manufactured by
Okuma
Discovered issues:
Bad Capacitor(s), Bad Circuit Board Component(s), Bad Cooling Fans, Bad Gate Section/Board, Bad Output Transistors/SCRs, Leaky Capacitors (Open, Corroded Traces)
Repaired on:
8/25/2022
VAC-I D8-A
is an
Drives-AC Spindle
manufactured by
Okuma
Discovered issues:
Bad Control Section/Board, Bad Cooling Fans, Bad Magnetic Contactor, Relay
Repaired on:
3/30/2022
VAC-I D8-A
is an
Drives-AC Spindle
manufactured by
Okuma
Discovered issues:
Bad Control Section/Board, Bad Power Section/Board
Repaired on:
1/18/2022
VAC-I D8-A
is an
Drives-AC Spindle
manufactured by
Okuma
Discovered issues:
Bad Control Section/Board, Bad Power Section/Board, Leaky Capacitors (Open, Corroded Traces), May Require Board Replacement, No Display
Repaired on:
8/19/2021
VAC-I D8-A
is an
Drives-AC Spindle
manufactured by
Okuma
Discovered issues:
No Problem Found, Physical Damage to the Circuit Board/s, Physical Damage to the Drive
Repaired on:
5/27/2021
