DEPENDABLE SPECIALISTS IN AC SERVO MOTOR REPAIR

EXPERT SERVICE REPAIR BACKED BY NO-HASSLE WARRANTY

Precision Zone specializes in motor repair. With over two decades of experience and certified team of technicians and engineers we have seen most of the motor in the market today. We go beyond straight forward motor repair and offer component replacement or full reconditioning of a motor.

WHAT TO EXPECT WHEN WORKING WITH PRECISION ZONE

Every motor sent to us is individually inspected by a Precision Zone technician. Each repair consists of:

  • Completely disassembling the motor and cleaning from debris, contaminants or corrosion.
  • Visual Evaluation is performed examining damaged or missing parts
  • Static Check
  • Baker Surge Test looking at the windings
  • Manufacturer Specific Test Equipment
  • Load Testing

BENEFITS OF PRECISION ZONE REPAIRS

Precision Zone's 72,000 sq foot facility is equipped to handle any industrial electronics repair. We have all the necessary tools to evaluate and repair your motor from multimeter and IR cameras, to megohm and oscilloscopes. Our large inventory of spare parts guarantees a quick turn-around. Precision Zone has custom built simulators to test the motor in real-life conditions once the repair is complete. This means once your motor arrives back all you have to do is install it and you're back in business.

  • FREE evaluation by expert technicians
  • FREE job estimate
  • Dedicated technical support for all customers
  • 12 mos warranty
  • Flat Price
  • Exchange option
  • Rush Service

Recently Repaired Products

Pacific Scientific R45GCNA-R2-NS-NV-00 image R45GCNA-R2-NS-NV-00 is an
Motors-AC Servo manufactured by Pacific Scientific
Discovered issues: Bad Condition - Requires Reconditioning
Family: R Rare earth series Brushless Servomotors
Frame size: 4.25 inch square frame
Stack Length multiple: 5 inch
Winding: G
Shaft and Mounting: NEMA Face
Holding brake option: No brake
Factory Preassigned: A
Primary Feedbacks: Size 21 frameless resolver
Secondary Feedbacks: No secondary
Shaft Sealing: No shaft seal
Sequence number: all parts are standard

Yaskawa SGMGH-44ACA6E image SGMGH-44ACA6E is an
Motors-AC Servo manufactured by Yaskawa
Discovered issues: Bad Condition - Requires Reconditioning, Bad DE Bearing, Bad ODE Bearing, Bad Brake, Worn DE Housing, Worn ODE Housing
Servomotor Type: SGMGH Sigma II
Rated Output: 4.4kW; 1500RPM
Power Supply: 200V
Encoder Specifications: 17-bit Incremental Encoder
Design revision order: Standard for 1500 RPM
Shaft Specifications: Straight with key and tap
Accessories: 24VDC Brake and Shaft Seal

Yaskawa SGMS-50A6AB image SGMS-50A6AB is an
Motors-AC Servo manufactured by Yaskawa
Discovered issues: Bad Encoder
Servomotor Type: SGMS
Rated Output: 5.0kW (6.7HP)
Power Supply: 200V Standard Configuration
Encoder Specifications: 4096 P/R Incremental Encoder
Rated Speed: 3000 RPM
Shaft Specifications: Straight with key and one shaft-end tap
Options: Standard

Siemens 1FT5066-0AC71-1-Z image 1FT5066-0AC71-1-Z is an
Motors-AC Servo manufactured by Siemens
Discovered issues: Incorrect Feed Back Alignment
Family and Series: AC Servomotor Series 5
Frame Size: 63 mm
Length: 6
Designation: Standard Type
Cooling Type: Non-ventilated
Rated Speed: 2000 RPM
DC Link Voltage: 600 V
Type of Construction: IM B5 (IM V1, IM V3)
Connection Type: Power Connection Connection + Bracket for the Signal Connection
Additional Data with Code: Z

Yaskawa SGMPH-02A1A-YR31 image SGMPH-02A1A-YR31 is an
Motors-AC Servo manufactured by Yaskawa
Discovered issues: Bad Condition - Requires Reconditioning, Bad DE Bearing, Bad ODE Bearing, Worn Brake Needs Reconditioning

Yaskawa SGMPH-02ANA-YR11 image SGMPH-02ANA-YR11 is an
Motors-AC Servo manufactured by Yaskawa
Discovered issues: Bad Condition - Requires Reconditioning, Bad DE Bearing, Bad ODE Bearing, Worn Brake Needs Reconditioning

Yaskawa SGM-04U3B4L image SGM-04U3B4L is an
Motors-AC Servo manufactured by Yaskawa
Discovered issues: Bad DE Bearing, Bad ODE Bearing
Servomotor Type: SGM
Rated Output: 400W (0.5HP)
Power Supply: 200V UL Recognized
Encoder Specifications: 2048 P/R Incremental Encoder
Revision Level: UL Recognized
Shaft Specifications: Straight with keyway
Options: Standard

Yaskawa SGM-08U3B4L image SGM-08U3B4L is an
Motors-AC Servo manufactured by Yaskawa
Discovered issues: Bad DE Bearing, Bad ODE Bearing, Broken Magnets on Rotor
Servomotor Type: SGM
Rated Output: 750W (1.0HP)
Power Supply: 200V UL Recognized
Encoder Specifications: 2048 P/R Incremental Encoder
Revision Level: UL Recognized
Shaft Specifications: Straight with keyway
Options: Standard

Yaskawa SGMG-09A2AAS image SGMG-09A2AAS is an
Motors-AC Servo manufactured by Yaskawa
Discovered issues: Bad Encoder Bearings, Bad DE Bearing, Bad Encoder, Bad ODE Bearing
Servomotor Type: SGMG
Rated Output: 0.9kW (1.2HP)
Power Supply: 200V Standard Configuration
Encoder Specifications: 8192 P/R Incremental Encoder
Rated Speed: 1500 RPM (CE SPEC ONLY: 200V)
Shaft Specifications: Standard (straight without key, when options not blank)
Options: Oil seal

Yaskawa SGM-08A3TE11 image SGM-08A3TE11 is an
Motors-AC Servo manufactured by Yaskawa
Discovered issues: Bad DE Bearing, Bad Feed Back Connector, Bad ODE Bearing, Broken Magnets on Rotor

Yaskawa SGMEV-04DDA6C image SGMEV-04DDA6C is an
Motors-AC Servo manufactured by Yaskawa
Discovered issues: Bad DE Bearing, Bad ODE Bearing
Servomotor Type: SGMEV Sigma V Flat type
Rated Output: 400W
Power Supply Voltage: 400V
Serial Encoder: 20-bit Incremental
Design Revision Order: Standard
Shaft End: Straight with key and tap
Options: With 24VDC holding brake
Control: Standard

Yaskawa SGMG-20A2ABS image SGMG-20A2ABS is an
Motors-AC Servo manufactured by Yaskawa
Discovered issues: Bad Condition - Requires Reconditioning, Bad Coil Insulation, Bad DE Bearing, Bad ODE Bearing, Bad Power Connector, Worn DE Housing, Worn ODE Housing
Servomotor Type: SGMG
Rated Output: 2.0kW (2.7HP)
Power Supply: 200V Standard Configuration
Encoder Specifications: 8192 P/R Incremental Encoder
Rated Speed: 1500 RPM (CE SPEC ONLY: 200V)
Shaft Specifications: Straight with key and one shaft-end tap
Options: Oil seal

Yaskawa SGMAH-01BAA61 image SGMAH-01BAA61 is an
Motors-AC Servo manufactured by Yaskawa
Discovered issues: Bad DE Bearing, Bad ODE Bearing
Servomotor Type: SGMAH Sigma II
Rated Output: 100W (0.13HP)
Power Supply: 100V
Encoder Specifications: 13-bit (2048 x 4) Incremental Encoder; Standard
Revision Level: Standard
Shaft Specifications: Straight with key and tap
Accessories: Standard; without brake
Option: None
Type: none

Yaskawa USAFED-09FS1 image USAFED-09FS1 is an
Motors-AC Servo manufactured by Yaskawa
Discovered issues: Bad DE Bearing, Bad Encoder, Bad ODE Bearing
Servomotor Type: US
Series: F Series
Enclosure: Totally-enclosed, Self-cooled Type
Magnet Type: Ferrite
Motor Output: 0.9kW (1.1HP)
Design Revision Order: F
With Encoder: 8192 P/R Absolute
Shaft Type: Taper
Drive End Specification: None
Opposite Drive End Specification: Standard (blank)

Yaskawa USAGED-30A22S image USAGED-30A22S is an
Motors-AC Servo manufactured by Yaskawa
Discovered issues: Bad Encoder
Servomotor Type: US
Series: G Series
Enclosure: Totally-enclosed, Self-cooled Type.
Magnet Type: Ferrite
Motor Output: 3.0kW (4.0HP)
Design Revision Order: A
With Encoder: 8192 P/R Incremental
Shaft Type: Straight
Drive End Specification: With oil seal
Opposite Drive End Specification: Standard (blank)

Mitsubishi HC-KFS43K-S9 image HC-KFS43K-S9 is an
Motors-AC Servo manufactured by Mitsubishi
Discovered issues: Bad Condition - Requires Reconditioning, Bad DE Bearing, Bad ODE Bearing

Mitsubishi HC-KFS43K image HC-KFS43K is an
Motors-AC Servo manufactured by Mitsubishi
Discovered issues: Bad Condition - Requires Reconditioning, Bad DE Bearing, Bad ODE Bearing
Servomotor Type: HC-KFS Series; Low inertia,small capacity,high resolution
Rated Output: 0.4kW
Rated speed: 3000 rpm; 200V
Electromagnetic brake: none
Reduction Gear: Without
Shaft type: with keyway
Compliance with Standard: Standard model

Yaskawa SGMPH-01BAA41 image SGMPH-01BAA41 is an
Motors-AC Servo manufactured by Yaskawa
Discovered issues: Passed Testing - Highly Recommend Recondition
Servomotor Type: SGMPH Sigma II
Rated Output: 100W (0.13HP)
Power Supply: 100V
Encoder Specifications: 13-bit (2048 x 4) Incremental Encoder
Design Revision Order: A
Shaft End Specifications: Straight with key
Accessories: Standard

Yaskawa SGMAS-08ACA21 image SGMAS-08ACA21 is an
Motors-AC Servo manufactured by Yaskawa
Discovered issues: Bad DE Bearing, Bad Feed Back Connector, Bad ODE Bearing
Servomotor Type: SGMAS AC Servomotor
Rated Output: 0.75kW
Supply Voltage: 200V
Encoder Specification: 17-bit Incremental Encoder
Design Revision Order: A
Shaft End Specification: Straight without key
Options: Without Brake

Yaskawa USAGED-20A22T image USAGED-20A22T is an
Motors-AC Servo manufactured by Yaskawa
Discovered issues: Bad Condition - Requires Reconditioning, Bad DE Bearing, Bad ODE Bearing, Worn ODE Housing, Bad Encoder Bearings
Servomotor Type: US
Series: G Series
Enclosure: Totally-enclosed, Self-cooled Type.
Magnet Type: Ferrite
Motor Output: 2.0kW (2.4HP)
Design Revision Order: A
With Encoder: 8192 P/R Incremental
Shaft Type: Straight
Drive End Specification: With keyway & oil seal
Opposite Drive End Specification: Standard (blank)

Fanuc A06B-0382-B102-7000 image A06B-0382-B102-7000 is an
Motors-AC Servo manufactured by Fanuc
Discovered issues: Bad Condition - Requires Reconditioning, Bad DE Bearing, Bad ODE Bearing, Incorrect Feed Back Alignment
Part Group: A06B
Model: 5T/2000
Shaft and Brake Specification: Large diameter screws
Encoder: High Speed High Res. ABS Pulse Encoder
Modification 1: #7*** GE Fanuc Nameplate
Modification 2: No other modifications

Yaskawa SGMG-13A2ABC image SGMG-13A2ABC is an
Motors-AC Servo manufactured by Yaskawa
Discovered issues: Bad Condition - Requires Reconditioning, Bad DE Bearing, Bad ODE Bearing, Worn Brake Needs Reconditioning, Worn DE Housing, Worn ODE Housing
Servomotor Type: SGMG
Rated Output: 1.3kW (1.7HP)
Power Supply: 200V Standard Configuration
Encoder Specifications: 8192 P/R Incremental Encoder
Rated Speed: 1500 RPM (CE SPEC ONLY: 200V)
Shaft Specifications: Straight with key and one shaft-end tap
Options: 24 VDC Brake

Yaskawa USAGED-30AS2OE image USAGED-30AS2OE is an
Motors-AC Servo manufactured by Yaskawa
Discovered issues: Bad Condition - Requires Reconditioning, Bad DE Bearing, Bad Encoder, Bad ODE Bearing, Worn Brake Needs Reconditioning, Worn DE Housing, Worn ODE Housing
Servomotor Type: US
Series: G Series
Enclosure: Totally-enclosed, Self-cooled Type.
Magnet Type: Ferrite
Motor Output: 3.0kW (4.0HP)
Design Revision Order: A
With Encoder: 8192 P/R Absolute
Shaft Type: Straight
Drive End Specification: Without keyway when opposite drive end specification is provided; With brake
Opposite Drive End Specification: Standard (blank)

Yaskawa USAGED-09AS1S image USAGED-09AS1S is an
Motors-AC Servo manufactured by Yaskawa
Discovered issues: Bad DE Bearing, Bad Encoder, Bad ODE Bearing, Bad Oil Seal, Bad Power Connector
Servomotor Type: US
Series: G Series
Enclosure: Totally-enclosed, Self-cooled Type.
Magnet Type: Ferrite
Motor Output: 0.9kW (1.1HP)
Design Revision Order: A
With Encoder: 8192 P/R Absolute
Shaft Type: Taper
Drive End Specification: With oil seal
Opposite Drive End Specification: Standard (blank)